Points North
Ltd,
Rosyth Europarc, Rosyth,
Fife,
Scotland, KY11 2YB
Tel +44(0)1383 417084
Fax +44(0)1383 414677
Mobile
07860 885154
Link to Office View
| |
|
|
|
|
|
|
|
|
Points North Ltd 2 Cromarty Campus Rosyth Europarc Rosyth Fife Scotland KY11 2YB Tel +44(0)1383 417084 Fax +44(0)1383 414677 Mob 07860 885154
|
|
|
|
|
|
|
|
GPS SELECTOR
INTERFACE
909 (B)
|
|
|
|
|
|
INTRODUCTION
When two GPS’s are fitted, this device selects the “best” for transmission to the electronic chart system, GMDSS or radar.The 909 (B) recognises the quality modes of the GPS signals. If the status of both GPS signals is equal, channel 1 is selected as the priority channel.
Two output options are available, selectable by jumper: -
- The 909 reads in the data from each GPS, stores it separately, and generates its own output message. The interface outputs position, cog, sog, date and time. If this does not meet your needs we can program the 909 to suit your exact requirements.
- The 909 passes through all the data from the selected GPS.
|
|
|
|
SPECIFICATION
INPUTS: 2 NMEA 0183 ports. Data must contain the minimum of the $GPGGA sentence. Ideal are GGA, VTG and ZDA.
CONTROL: Centre-off switch to select CH1, AUTO or CH2.
OUTPUT: 1. NMEA 0183 $GPGGA, $GPVTG and $GPZDA.
Rate is in time with the input.
2. NMEA 0183 data passed through from selected channel. 5v CMOS limited 5mA drive. (NMEA 0183, RS422, RS232 compatible).
|
|
|
|
POWER: 9 to 32v DC at 200mA.
HOUSING: Duck Egg Green diecast box 222 x 146 x 55mm.
FEATURES: LEDs on data in and out and bicolour status led.
Power fail and program run watchdog circuit.
All connections removable terminal blocks.
|
|
| |
|